File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 23:59, 20 November 2013 | Interlock Flow Chart.pdf (file) |  |
218 KB | RFID Interlock Flow Chart | 1 |
| 15:07, 14 July 2013 | Led Table-Top On.jpg (file) |  |
1.8 MB | Led table frame with the top placed on. The legs have not been attached yet. | 1 |
| 15:06, 14 July 2013 | Led Table-Top Back.jpg (file) |  |
1.54 MB | Assembling the top. I used a sheet of Soft Ice Acrylic from Allied Plastics. | 1 |
| 15:05, 14 July 2013 | Led Table-Test Fit.jpg (file) |  |
2.14 MB | Test fitting the led array into the body of the table. | 1 |
| 11:43, 15 June 2013 | Led Table-Led Cube test1.jpg (file) |  |
1.15 MB | First test after adding the cubes. Now it looks better than bare leds. | 1 |
| 11:41, 15 June 2013 | Led Table-Cube Install.jpg (file) |  |
1.43 MB | Photo of the led table after adding the spray painted cubes. | 1 |
| 11:40, 15 June 2013 | Led Table-Led Array test1.jpg (file) |  |
1.09 MB | The first test of the led array after mounting them in the board and adding a support structure below to protect the wiring. | 1 |
| 11:39, 15 June 2013 | Led Table-Led Array.jpg (file) |  |
976 KB | The Leds after first installation. | 1 |
| 11:38, 15 June 2013 | Led Table-Led Install.jpg (file) |  |
1.28 MB | The backside of the led array after the led string was mounted and glued in. | 1 |
| 21:43, 4 June 2013 | CameraMount-Rev-mounted.jpg (file) |  |
1.45 MB | Canon Digital Rebel XT mounted. | 1 |
| 21:42, 4 June 2013 | CameraMount-Rev2-back.jpg (file) |  |
1.28 MB | Revision 2 build of the pan/tilt camera mount | 1 |
| 21:40, 4 June 2013 | CameraMount-Rev2.jpg (file) |  |
1.35 MB | Revision 2 build of the pan/tilt camera mount. | 1 |
