File list
This special page shows all uploaded files.
 Date |
Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 15:01, 17 August 2017 | Sherline CNC controller.jpg (file) |  |
2.37 MB | Chrismini | CNC controller for Sherline 4000 lathe. Controller constructed and donated by Rich Meyer. Photo by Rich Meyer. | 1 |
| 14:58, 17 August 2017 | Sherline CNC lathe.jpg (file) |  |
2.57 MB | Chrismini | Sherline 4000 lathe donated by Rich Meyer. Can be used either manually or in CNC-mode. Photo by Rich Meyer. | 1 |
| 11:47, 17 August 2017 | Maxx20 dyesub.jpg (file) |  |
63 KB | Chrismini | Stahl MAXX20 16" x 20" dye sublimation flat press | 1 |
| 23:02, 16 August 2017 | Sg800 dyesub.jpg (file) |  |
29 KB | Chrismini | Sawgrass Virtuoso SG800 Dye Sublimation printer (11x17 capacity) | 1 |
| 13:27, 9 August 2017 | Sherline 3058.jpg (file) |  |
17 KB | Chrismini | Hold-down set to clamp Sherline 4-jaw chuck to Sherline mill or other T-slots. | 1 |
| 13:24, 9 August 2017 | Sherline 3013.jpg (file) |  |
25 KB | Chrismini | Step block hold-down set for Sherline mill. | 1 |
| 13:21, 9 August 2017 | Sherline 3012.jpg (file) |  |
20 KB | Chrismini | Hold-down set for Sherline mill. | 1 |
| 13:16, 9 August 2017 | Sherline 1187.jpg (file) |  |
17 KB | Chrismini | Chuck-to-T-slot adapter for Sherline mill. 3/4-16 threaded adapter with T-head. Used for mounting Sherline chucks into T-slots. | 1 |
| 13:11, 9 August 2017 | Sherline 3750.jpg (file) |  |
22 KB | Chrismini | Tilting angle plate for holding vise, rotary table, or chuck on Sherline mill. | 1 |
| 13:07, 9 August 2017 | Sherline 3725.jpg (file) |  |
13 KB | Chrismini | Tooling plate for Sherline mill rotary table. | 1 |
| 13:05, 9 August 2017 | Sherline 3570.jpg (file) |  |
21 KB | Chrismini | Rotating base for mill vise. Sherline mill. | 1 |
| 12:59, 9 August 2017 | Sherline 3054.jpg (file) |  |
17 KB | Chrismini | Boring bar holder for Sherline mill. 3/8" diameter tools, holes up to 1.75" diameter. | 1 |
| 11:54, 9 August 2017 | Sherline 3061.jpg (file) |  |
14 KB | Chrismini | Boring bars for use on Sherline microlathe and Sherline micromill. | 1 |
| 11:49, 9 August 2017 | Sherline 2259-2260.jpg (file) |  |
19 KB | Chrismini | RH Carbide insert holder for 55 degree and 80 degree inserts. Used for boring. | 1 |
| 11:45, 9 August 2017 | Sherline 7600.jpg (file) |  |
14 KB | Chrismini | 3/8" tool holder for Sherline Microlathe. Intended for use with insert tools. | 1 |
| 11:41, 9 August 2017 | Sherline 7600.png (file) |  |
29 KB | Chrismini | 3/8" tool holder for Sherline Microlathe. Intended for use with insert tools. | 1 |
| 11:32, 9 August 2017 | Sherline 1074.jpg (file) |  |
18 KB | Chrismini | Steady rest for Sherline micro-lathe. Will hold parts up to 1.75" diameter. | 1 |
| 11:29, 9 August 2017 | Knurled knob example.jpg (file) |  |
16 KB | Chrismini | Example of knurled knob made with Sherline 3004 knurling tool. Knob is not included with knurling tool. | 1 |
| 11:26, 9 August 2017 | Sherline 3004.png (file) |  |
22 KB | Chrismini | Knurling tool holder and knurl for Sherline micro-lathe | 1 |
| 11:22, 9 August 2017 | Sherline 2200.png (file) |  |
27 KB | Chrismini | Radius cutting attachment for Sherline micro-lathe | 1 |
| 11:17, 9 August 2017 | Sherline 1206.png (file) |  |
25 KB | Chrismini | Threading die holder for tailstock of Sherline micro_lathe. Holds either 1" or 13/16" button die. | 1 |
| 11:13, 9 August 2017 | Sherline 1076.jpg (file) |  |
21 KB | Chrismini | 4-jaw centering chuck for Sherline micro-lathe | 1 |
| 17:22, 5 August 2017 | Classrooms.jpg (file) |  |
275 KB | Chrismini | Map of general-use classrooms | 1 |
| 10:18, 31 July 2017 | UsingLTSpicePart1-Homework.png (file) |  |
32 KB | Wandrson | 1 | |
| 10:04, 31 July 2017 | LTSpiceExamples.zip (file) |  |
2 KB | Wandrson | 1 | |
| 10:02, 31 July 2017 | UsingLTSpicePart1-Example4.zip (file) | |
745 B | Wandrson | 1 | |
| 09:27, 31 July 2017 | UsingLTSpicePart1-Example3.zip (file) | |
637 B | Wandrson | 1 | |
| 09:26, 31 July 2017 | UsingLTSpicePart1-Example2.zip (file) | |
448 B | Wandrson | 1 | |
| 09:24, 31 July 2017 | UsingLTSpicePart1-Example1.zip (file) | |
393 B | Wandrson | 1 | |
| 15:36, 30 July 2017 | UsingLTSpiceHandout.pdf (file) |  |
2.26 MB | Wandrson | 1 | |
| 11:28, 24 July 2017 | YouDontNeedAnArduinoToFlashAnLED Class Slides.pdf (file) | |
5.09 MB | Wandrson | 1 | |
| 20:00, 22 July 2017 | YouDontNeedAnArduinoToFlashAnLedClassBooklet.pdf (file) | |
11.84 MB | Wandrson | 1 | |
| 10:36, 16 July 2017 | DMS-P&L-2017-07-16.png (file) |  |
70 KB | Lampy | 2 | |
| 17:01, 15 July 2017 | Capital equipment p1.jpg (file) |  |
309 KB | Chrismini | Re-added the DRAFT watermark (which I forgot on the prior version) | 5 |
| 17:00, 15 July 2017 | Capital equipment p2.jpg (file) |  |
238 KB | Chrismini | New/used populates from page 1. | 3 |
| 09:38, 5 July 2017 | 1825Monetary DMS rear parking lot.jpg (file) |  |
157 KB | Chrismini | Aerial photo showing rear parking lot, and the spaces that can block our southern neighbor's parking lot - especially if large vehicles/trailers are there. Original Photo Google Earth. | 1 |
| 20:51, 2 July 2017 | Clausing-Colchester 13inch color.jpg (file) |  |
735 KB | Chrismini | Color photo of 13 inch Clausing Colchester lathe, installed early 2017. | 1 |
| 15:32, 25 June 2017 | MultiCAM-GCodes and MCodes with Software Ports.pdf (file) | |
205 KB | JaST | 1 | |
| 16:55, 23 June 2017 | DMS-P&L-2017-06-23.png (file) |  |
57 KB | Lampy | 1 | |
| 13:00, 20 June 2017 | DPRG and Hackerspace Policy - Google Docs.pdf (file) | |
43 KB | Mrhavens | Original DPRG-DMS Agreement | 1 |
| 16:01, 9 June 2017 | 2016 Annual Report (ID 160113).pdf (file) | |
132 KB | StanSimmons | 1 | |
| 18:53, 3 June 2017 | 1040inst.pdf (file) | |
612 KB | Chrismini | Instructions (including jaw reversal) for Sherline 3-jaw scrolling lathe chuck item 1040. Edited from manufacturer's sheet to clarify jaw instructions during jaw reversal. | 1 |
| 10:44, 1 June 2017 | DMS Floor Plan.jpg (file) |  |
1.71 MB | Chrismini | Common workshop bay changed to accomodate new work tables and moving the hand tools. Modified Science to show L-shaped layout. | 3 |
| 21:34, 19 May 2017 | May 2017 Financial.JPG (file) |  |
56 KB | Kriskat30 | 2 | |
| 19:59, 18 May 2017 | Sherline 3100.jpg (file) |  |
62 KB | Chrismini | Manual thread cutting attachment (kit) for Sherline lathe. Combinations of gears enable cutting numerous different thread pitches. | 1 |
| 14:39, 18 May 2017 | Sherline 3551.jpg (file) |  |
19 KB | Chrismini | Sherline model 3551 machining vise for use on Sherline mill. | 1 |
| 14:31, 18 May 2017 | Sherline 7506.jpg (file) |  |
18 KB | Chrismini | Sherline machinist parallels for use on Sherline mill. The pieces in this set are 2-1/2″ long and 1/16″ thick. The set includes five pairs of precision ground steel bars in heights of: 1/4″ 3/8″ 1/2″ 5/8″ 3/4″ | 1 |
| 14:28, 18 May 2017 | Sherline 3072.jpg (file) |  |
20 KB | Chrismini | Sherline 1/4" Jacobs drilling chuck for use on Sherline mill. | 1 |
| 14:24, 18 May 2017 | Sherline 1297.jpg (file) |  |
22 KB | Chrismini | Sherline model 1297 1-1/4" spacer block. Supplied with mill. | 1 |
| 14:17, 18 May 2017 | Sherline 3701.jpg (file) |  |
14 KB | Chrismini | Sherline right angle attachment to hold Sherline 3700 rotary table vertically on Sherline 5400 mill. | 1 |
 First page |
 Previous page |
 Next page |
 Last page |
