File:Multicam torque wrench 1.jpeg
Size of this preview: 800 × 450 pixels. Other resolutions: 320 × 180 pixels | 2,667 × 1,500 pixels.
Original file (2,667 × 1,500 pixels, file size: 524 KB, MIME type: image/jpeg)
Multicam Torque wrench instructions step 1.
- Set the torque wrench to 25 Ft-Lbs.
- Put the torque wrench on the shaft. It will rest there while you position the nut wrench.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 11:01, 3 April 2019 | 2,667 × 1,500 (524 KB) | Chrismini (talk | contribs) | Torque wrench is pre-calibrated to 25Ft-lbs. It is not necessary to set it. | |
09:46, 3 April 2019 | 2,667 × 1,500 (543 KB) | Chrismini (talk | contribs) | Multicam Torque wrench instructions step 1. * Set the torque wrench to 25 Ft-Lbs. * Put the torque wrench on the shaft. It will rest there while you position the nut wrench. |
- You cannot overwrite this file.
File usage
The following file is a duplicate of this file (more details):
There are no pages that link to this file.