File:Multicam torque wrench 1 RevA.jpeg

From Dallas Makerspace
Jump to: navigation, search
Original file ‎(2,667 × 1,500 pixels, file size: 524 KB, MIME type: image/jpeg)
  • Put the torque wrench on the shaft. It will rest there while you position the nut wrench.

(Wrench is pre-calibrated and does not need to be set).

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current11:05, 3 April 2019Thumbnail for version as of 11:05, 3 April 20192,667 × 1,500 (524 KB)Chrismini (talk | contribs)* Put the torque wrench on the shaft. It will rest there while you position the nut wrench. (Wrench is pre-calibrated and does not need to be set).
  • You cannot overwrite this file.

The following file is a duplicate of this file (more details):

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Width2,667 px
Height1,500 px
Bits per component
  • 8
  • 8
  • 8
Pixel compositionRGB
OrientationNormal
Number of components3
Horizontal resolution72 dpi
Vertical resolution72 dpi
Software usedAdobe Photoshop CS6 (Macintosh)
File change date and time11:00, 3 April 2019
Exif version2.21
Color spaceUncalibrated
Unique ID of original document19BC7D52A8140611618C83B7D0B37DA1
Date and time of digitizing05:57, 3 April 2019
Date metadata was last modified06:00, 3 April 2019
Retrieved from "https://dallasmakerspace.org/w/index.php?title=File:Multicam_torque_wrench_1_RevA.jpeg&oldid=28535"